Metagames


Précédent   Metagames > Univers Playstation > Playstation 3

Playstation 3 Console de salon, sortie en 2006 (PS3), 2009 (PS3 Slim), 2012 (PS3 Ultra Slim)

Réponse
 
Outils de la discussion Modes d'affichage
Vieux 15/11/2011, 09h52   #41 (permalink)
Profil
Membre
Ancienneté  86%
Ancienneté 86%
 
Avatar de alien_touch
 
Date d'inscription: mai 2006
Localisation: Pas bien loin de chez vous
Âge: 48
Genre : Homme
Pays :
Messages: 1 616
Téléchargements: 0
Uploads: 0
Merci: 11
Remercié 8 fois dans 8 Posts
Par défaut

Le CFW 3.56 de Demon Hades est dispo.

Désolé je n'ai pas le temps de traduire :

FUNCTIONS
  • Support PEEK / POKE lv2, using the typical SYSCALL 6 and 7 for compatibility with existing homebrew.
  • Support PEEK / POKE lv1 native SYSCALL using 10 and 11 respectively. These are used as SYSCALL than the lv2, the devs just have to use them as you would those of lv1 lv2 but affecting.
  • Load unsigned applications, FSELF format natively. That is, a normal application or npdrm FSELF valid format worked directly. (No touch-memory copy in the lv2).
  • Load logically signed applications, both official and unofficial signature valid.
  • Support for applications up to version 3.56.
  • Use of all SYSCALL system, provided that the product no later verify mode, QA, etc.
  • No need to modify the PARAM.SFO in the event that hypothetically would use a application that requests a version higher than 3.56 in either npdrm / normal application / or application running from the bdemu.
  • Installation of Retail and Debug PKG since the PKG Install option.
  • System settings in the XMB QA hacked. Now you can open the options using the normal combo without QA flag is active or a valid token or existing on your machine. Any options changed is maintained in the system registry settings. This QA system hack allows any SPRX to call the XMB to check this information hacked receive information, such as the nas_plugin.sprx, which in the case of DEX would permit installed without any patch of PKG Retail. As always be careful you do with those options, this is the safest way to have the QA without be QA, and not have to modify the EEPROM in any recalculated appearance or tokens of any kind. Here I have to thank Sony for making the security of your token only be in one byte and not in those should be.
LV2:
  • FIX: Patch to allow loading of applications for (avoids errors 0×80010009)
  • FIX: Patch to avoid checking the firmware version of the application against the version of firmware stored in the memory of lv2 (avoid the error 0×80010019)
  • FIX: Patch to avoid the error 0x8001003C (allows loading of applications that request more internally than the current version)
  • FIX: Patch to avoid the error 0x8001003D
  • FIX: Patch to avoid the error 0x8001003E (using hdd patch and have no disc inserted)
  • FIX: Enables the use of all SYSCALL, avoiding generic error 0×80010003.
CHANGES IN THE LV2 356:
  • FIX: Patching a new security check that prevents updater mode, it could launch an application unsigned with the minimum key 0xD (3.56), avoiding the error 0×80010009. NOTE: See NOTE AT THE END OF THIS README
  • FIX: otherwise is used to integrate the new SYSCALL 6, 7, 10, 11 at lv2.
LV1:
  • Added support for PEEK / POKE NATIVE at lv1. The method used to integrate these new hypercalls not use hypercall existing one, but really any hypercall not used in the system is a peek or poke depending on the case. To interact with PEEK / POKE, lv2 use SYSCALL of 10 and 11 respectively.
  • Changes in the hypercall mmap (114). In the 3.56 Sony made significant changes in this hypercall to avoid the use that was being given to the lv1 to lv2 mapping. Now this hypercall checks that the key argument has not been modified, are checked mapping ranges (Someone who understands this will realize how dangerous it is that you map the critical thing, and do not speak of lv1) the hypercall code is divided into sub-functions into chunks for rolling the analysis.
    3.56 In this version of this hypercall MA has not been touched, but having the support of PEEK / POKE in lv1 mapping is no longer necessary. In a later version is not ruled out such a check hypercall it’s not complicated really, just it was not necessary for this version.
  • Changes in the hypercall unmap (115), similar to mmap, its code shared between subfunctions.
  • FIX: Added some patches to avoid integrity checks lv1 / LV0.
    FIX: Added patches in the SPM and the DM to enable the use of any service. The patch is different, smaller, the SS patch exists (this is no longer compatible with 3.56), in my testings my patch does not produce any kind of problem with trophies, or saved games, etc..
  • TODO: Delete the problem of not being able to downgrade to a version lower than 3.56. Currently not possible down from 3.56 after upgrading to the.
LV0 APPLDR:
  • FIX: Patch to override the check ECDSA digital signature. Now an application with an invalid signature signed will be considered valid. For example, “sign” an application without having the proper private key to generate a proper signature.
  • FIX: Patch that removes the hash check of the application segments. A hash will be considered invalid valid.
  • FIX: Patch to override that you can not use FSELF retail consoles. This patch is different from that in ps3devwiki, the patch is on that page about this subject brickea machines has a problem metadata to decrypt the encrypted executables retail.
  • FIX: Patch to override the protection added in 3.55 (in the case of applications npdrm / normal, previously only was in charge of the RVK) which prevents applications can be used above the indicated version in the firmware today. That is, in a hypothetical case, a game trying to throw in a 3.60 3.56.
  • FIX: Patch to override the protection auth check the applications (added in 3.56), this check detects programs created public tools as they always put the same auth, auth superior one.
  • FIX: Patch to remove the protection from the white list of authorized programs, added in 3.56. Now you can use all applications as 3.55 and below.
NOTES:
  • The lv2 is protected by a hash in lv1, in case you want to play an offset that encompassed in the range of protection, this would produce a panic check off the system. To avoid this problem, use the tool that is attached to this package before using poke modify lv2. Why not to implement this patch directly is because not everyone is dev, and that can not be touched lv2 is safe for the user. Of course the source code of this program is included, so a dev can see how using the POKE lv1 patched the problem.
  • You can now exit of service mode, and use the lv2diag as before, but this has a potential danger. The 3.56 now makes it impossible to make a downgrade to less than 3.56, meaning that if you are in the 3.56 in him are, if you have time you tried to cancel out a version that checks the update manager. The problem is a programming error that allows updating Lv2Diag.self, the failure is that No checks that the update is in the usb or to verify that this is valid, the program formats the flash 1.2 and 3. That is, if then fails, your system would not have died partially flashes, still work ROS can use a lv2diag active again, but who Forewarned is forearmed. Lv2diag Beware!
  • Attached to this package is an updated application to extract the nodes of a dump of lv1 is an update of the application made by Graf Chokolo, now has support for versions 3.15, 3.41, 3.55 and 3.56 in one program. Useful to display the nodes extracted from your dump.
  • The firmware finished graphic will be added when finished JFW 3.41 itself.
    In the package adds an application, I do not think there publicly, to put the product model directly from the XMB, acts as a toggle, in the event that you can use the product as simply So I removed the product.
  • As a final note to remember that this is the first version of the firmware, so constructive criticism are welcome. As I suppose that due to this publication where patches are appldr, many variants will come out of it, just remember that the first publication was this.
  • Do not bite the hand that feeds you, today is a 3.56 higher perhaps tomorrow another, or maybe not.
Source ici : http://jailbreakscene.com/main/2011/...ed/#more-10811

A tester avec prudence
__________________
PS3 Fat 20 Go
En attende d'une PS4
alien_touch est déconnecté   Réponse avec citation
Vieux 15/11/2011, 13h45   #42 (permalink)
Profil
Administrateur
Ancienneté  81%
Ancienneté 81%
 
Avatar de Valiran
 
Date d'inscription: mai 2006
Localisation: Montpellier
Âge: 40
Genre : Homme
Pays :
Messages: 9 874
Téléchargements: 0
Uploads: 0
Merci: 27
Remercié 115 fois dans 87 Posts
Par défaut

!!!!NE PAS INSTALLER!!!!

Le CFW 3.56 bloque la PS3 en 3.56 éternellement, sans un flasheur hardware, il vous sera impossible de faire une mise à jour, même officielle. De plus, Aucun homebrew ni Backup Manager ne fonctionne dessus à l'heure actuelle, car aucun n'est codé pour 3.56 mais pour 3.55. Bilan, ce CFW ne sert strictement à rien à l'heure actuelle, à par amener des emmerdes!
__________________
Une belle boite à soupirs/rage/autre:
_________0_________
|_________________|

Mes ventes:

Près de 3000 cartes Magic, l'Assemblée
Valiran est déconnecté   Réponse avec citation
Vieux 16/11/2011, 04h29   #43 (permalink)
Profil
Membre
Ancienneté  43%
Ancienneté 43%
 
Avatar de lilg
 
Date d'inscription: octobre 2009
Localisation: Dakar
Âge: 37
Pays :
Messages: 9
Téléchargements: 46
Uploads: 0
Merci: 0
Remercié 0 fois dans 0 Posts
Par défaut

est ce que sa vaut le coup de l installer les derniers jeux sorties requieres le firmware 3.7 ou plus
lilg est déconnecté   Réponse avec citation
Vieux 16/11/2011, 05h35   #44 (permalink)
Profil
oMc
Modérateur
Ancienneté  82%
Ancienneté 82%
 
Avatar de oMc
 
Date d'inscription: mai 2006
Âge: 39
Pays :
Messages: 10 751
Téléchargements: 3
Uploads: 2
Merci: 879
Remercié 1 582 fois dans 1 027 Posts
Par défaut

Citation:
Envoyé par lilg Voir le message
est ce que sa vaut le coup de l installer les derniers jeux sorties requieres le firmware 3.7 ou plus
As tu pris la peine de lire le message juste au dessus du tien ?

Si tu es en CFW 3.55, restes y pour le moment.
__________________
Bit my shiny metal ass.
oMc est déconnecté   Réponse avec citation
Vieux 16/11/2011, 18h54   #45 (permalink)
Profil
Membre
Ancienneté  43%
Ancienneté 43%
 
Avatar de lilg
 
Date d'inscription: octobre 2009
Localisation: Dakar
Âge: 37
Pays :
Messages: 9
Téléchargements: 46
Uploads: 0
Merci: 0
Remercié 0 fois dans 0 Posts
Par défaut

si j ai lui c'est pourquoi je dit que c'est pas la peine de l' installer attendre les cfw 3.7 ou plus serait plus avantageux
lilg est déconnecté   Réponse avec citation
Vieux 17/11/2011, 05h11   #46 (permalink)
Profil
oMc
Modérateur
Ancienneté  82%
Ancienneté 82%
 
Avatar de oMc
 
Date d'inscription: mai 2006
Âge: 39
Pays :
Messages: 10 751
Téléchargements: 3
Uploads: 2
Merci: 879
Remercié 1 582 fois dans 1 027 Posts
Par défaut

Ton message n'était pas clair et tourné comme une question. La ponctuation c'est utile parfois
__________________
Bit my shiny metal ass.
oMc est déconnecté   Réponse avec citation
Vieux 17/11/2011, 21h20   #47 (permalink)
Profil
Membre
Ancienneté  43%
Ancienneté 43%
 
Avatar de lilg
 
Date d'inscription: octobre 2009
Localisation: Dakar
Âge: 37
Pays :
Messages: 9
Téléchargements: 46
Uploads: 0
Merci: 0
Remercié 0 fois dans 0 Posts
Par défaut

ok tu as raison
lilg est déconnecté   Réponse avec citation
Vieux 04/01/2012, 12h37   #48 (permalink)
Profil
Membre
Ancienneté  58%
Ancienneté 58%
 
Avatar de chronoss
 
Date d'inscription: mai 2008
Genre : Homme
Pays :
Messages: 811
Téléchargements: 51
Uploads: 0
Merci: 15
Remercié 13 fois dans 7 Posts
Envoyer un message via MSN à chronoss Envoyer un message via Yahoo à chronoss
Par défaut

C'est une chouete CFW mais bidon pour l'installer

J'ai parlé trop vite

Dernière modification par chronoss ; 04/01/2012 à 22h28.
chronoss est déconnecté   Réponse avec citation
Vieux 17/01/2012, 17h38   #49 (permalink)
Profil
Membre
Ancienneté  32%
Ancienneté 32%
 
Date d'inscription: décembre 2010
Âge: 39
Pays :
Messages: 59
Téléchargements: 0
Uploads: 0
Merci: 0
Remercié 0 fois dans 0 Posts
Par défaut

Bonjour,

qui est au courant de l'avancé du futur hack PS3 ?

Merci
Minimike1369 est déconnecté   Réponse avec citation
Vieux 25/01/2012, 06h51   #50 (permalink)
Profil
Membre
Ancienneté  58%
Ancienneté 58%
 
Avatar de chronoss
 
Date d'inscription: mai 2008
Genre : Homme
Pays :
Messages: 811
Téléchargements: 51
Uploads: 0
Merci: 15
Remercié 13 fois dans 7 Posts
Envoyer un message via MSN à chronoss Envoyer un message via Yahoo à chronoss
Par défaut

Tout le monde car il n'y a pas encore de news concret, que de promesse par-ci par là...
chronoss est déconnecté   Réponse avec citation
Réponse
Précédent   Metagames > Univers Playstation > Playstation 3

Outils de la discussion
Modes d'affichage

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non
Trackbacks are non
Pingbacks are non
Refbacks are non



Fuseau horaire GMT +1. Il est actuellement 07h11.


© 2003-2018 MetaGames. Tous droits réservés.